Independent home-network planning tools
GUIDE / VLAN

Separate trusted, guest and IoT devices with VLANs

Group devices by trust and allow only the traffic each group needs.

VLANs need firewall policy

Different VLAN IDs provide little security if the router allows all inter-VLAN routing. Give each VLAN a subnet and DHCP scope, then define explicit firewall policy.

NetworkExamplesBaseline policy
TrustedPCs and phonesInternet plus required NAS services
IoTTVs, speakers, appliancesInternet; block new sessions toward Trusted
GuestVisitorsInternet only, block LAN, isolate clients
ManagementRouter, switches and APsOnly administrator devices

Map ports and SSIDs

  • Router-switch-AP uplinks are trunks carrying tagged VLANs.
  • A normal endpoint port is an untagged/access member of one VLAN.
  • Map SSIDs to VLANs, but avoid excessive SSIDs because management frames consume airtime.

Service exceptions

Discovery for AirPlay, Chromecast or IoT control may need an mDNS reflector and narrow firewall exceptions. Prefer exact sources, destinations and ports over broad bidirectional access.

Before rollout

  • Keep a safe wired management port
  • Back up the current configuration
  • Verify DHCP and DNS in every VLAN
  • Test that IoT cannot initiate toward Trusted
  • Test guest isolation from LAN and other guests

Field case

Assume an IoT TV and speaker move to VLAN 20 and only phone discovery fails. Do not open every VLAN bidirectionally; separate control traffic from mDNS discovery.

Step-by-step verification

1. Confirm IoT cannot initiate to Trusted. 2. Allow only required device addresses and ports from Trusted. 3. Scope the mDNS reflector to required VLAN pairs and retest guest isolation.

Interpretation

Direct IP success with discovery failure points toward mDNS. Direct access failure points first to routing, firewall policy or return path.

Applicability limits

Vendor cloud and broadcast requirements vary, and mDNS does not cover every discovery protocol. Remove broad temporary rules after diagnosis.

Completion criteria

  • Decisions and assumptions are written down.
  • Capacity, security and rollback checks are complete.
  • The design was tested against actual device, ISP and local requirements.

Open related worksheet/tool