Independent home-network planning tools
POWER OVER ETHERNET

PoE power budget calculator

Add the maximum draw of cameras, wireless APs, intercoms and other devices, then check both switch power and ports.

1. Devices and switch

Use the PoE budget in the switch data sheet
20% starting point; adjust for your design

2. Results

Device load—
Recommended budget—
Ports used—
Rating minus load—
Power budget check
Port count check

Minimum PoE type per device

Input rule: Use maximum draw or maximum PoE input from the data sheet, not an observed average. Cable length, temperature and PSE implementation change real margins.

Formula

Device load W = Σ(quantity × maximum W each)
Recommended budget = device load W ÷ (1 − headroom)

Device types are conservatively compared with power available at the powered device (PD). Advertised PSE output is higher because of cable loss.

Read how to choose PoE types and inputs →

Worked example

Four cameras at 12 W maximum plus two APs at 18 W total 84 W. With 20% headroom the recommended budget is 84 ÷ 0.8 = 105 W, using six ports. An 8-port 120 W switch passes numerically, but per-port PoE type and startup or heater peaks still need verification.

Next action by result

  • Power and ports pass: confirm total budget and per-port standard in the data sheet.
  • Budget fails: use a larger budget or split across an appropriate PSE; do not size to average draw.
  • Ports fail: design expansion with the required PoE, VLAN and uplink support.

Verification: record per-port power during startup and night IR transition. The estimate does not reproduce every cable, temperature or vendor implementation effect.