Independent home-network planning tools
GUIDE / WI-FI

Wi-Fi channels, coverage and roaming

Prioritize AP placement, wired backhaul, interference and channel reuse over headline speed.

Use each band intentionally

BandStrengthWatch for
2.4 GHzRange and wall penetrationCongestion; use 20 MHz and 1/6/11 where applicable
5 GHzSpeed and channel choiceWall loss; DFS radar events
6 GHzClean, wide channelsClient and regulatory support; shorter range

Placement beats transmit power

Put APs high and open near the center of use. Avoid metal cabinets, floor corners, microwaves and thick concrete. A wired AP at moderate power is usually better than one high-power AP trying to cross every wall.

Channel width and roaming

  • Use 20 MHz on crowded 2.4 GHz.
  • 80 MHz on 5 GHz is fast, but 40 MHz can be more stable near many neighbors.
  • Give adjacent APs different channels and avoid excessive overlap.
  • Matching security and SSID enables roaming, but the client decides when to move.

Measure

  • Record RSSI, link rate and latency in every room.
  • Compare throughput near the AP and at weak points against a wired server or iperf3 endpoint.
  • Evaluate packet loss, jitter and call stability, not speed alone.

New to measurement? Follow the instructions immediately above the inputs in the room-by-room Wi-Fi survey log. They identify phone and laptop tools, define RSSI, and specify room position, device orientation, three runs and median selection.

Reality checkDisplayed link rate is not application throughput. Wi-Fi is a shared half-duplex medium affected by walls, interference and client capability.

Field case

Assume a bedroom measures −76 dBm, 3% loss and repeated video-call drops. Do not buy an AP from one speed test; keep the median of three runs with the same client, point and orientation.

Step-by-step verification

1. Record RSSI, latency and loss near the AP and at the weak point. 2. Inspect 5 GHz congestion and link rate. 3. Change one variable and repeat in the same time window.

Interpretation

Improved RSSI and loss support a coverage fix. Better RSSI with poor throughput points to congestion, backhaul or WAN capacity.

Applicability limits

A value such as −67 dBm is a starting point, not a universal pass mark. Client radios, neighbors, walls and local rules change results.

Completion criteria

  • Decisions and assumptions are written down.
  • Capacity, security and rollback checks are complete.
  • The design was tested against actual device, ISP and local requirements.

Open related worksheet/tool