Start with one simple subnet
A small home can begin with a subnet such as 192.168.10.0/24. It normally provides 254 host addresses; .0 identifies the network and .255 is broadcast.
| Example range | Purpose |
|---|---|
| 192.168.10.1 | Default gateway |
| .2–.49 | Reservations for switches, APs and NAS |
| .50–.199 | DHCP clients |
| .200–.239 | Lab or temporary static devices |
Prefer DHCP reservations
Reserve the MAC address of a NAS or AP on the router so addressing stays in one source of truth. If a device needs a static address, keep it outside the pool and record its gateway, mask and DNS settings.
Separate DNS failure from Internet failure
- Test the local gateway.
- Test an external IP such as
1.1.1.1. - If IP works but names fail, inspect DNS configuration and server health.
Avoid overlap
Two sites using the same common subnet can conflict across a VPN or double-NAT link. If remote access matters, avoid the most common factory-default subnet.